Temperature dependent I-V characteristics of an Au/n-GaAs Schottky diode analyzed using Tung's model

dc.contributor.authorKorucu, Demet
dc.contributor.authorTurut, Abdülmecit
dc.contributor.authorEfeoglu, Hasan
dc.date.accessioned2025-05-10T19:43:18Z
dc.date.issued2013
dc.departmentİstanbul Medeniyet Üniversitesi
dc.description.abstractThe current-voltage (I-V) characteristics of Au/n-GaAs contacts prepared with photolithography technique have been measured in the temperature range of 80-320K. The ideality factor and barrier height (BH) values have remained almost unchanged between 1.04 and 1.10 and at a value of about 0.79 eV at temperatures above 200K, respectively. Therefore, the ideality factor values near unity say that the experimental I-V data are almost independent of the sample temperature, that is, contacts have shown excellent Schottky diode behavior above 200K. An abnormal decrease in the experimental BH Phi(b) and an increase in the ideality factor with a decrease in temperature have been observed below 200 K. This behavior has been attributed to the barrier inhomogeneity by assuming a Gaussian distribution of nanometer-sized patches with low BH at the metal-semiconductor interface. The barrier inhomogeneity assumption is also confirmed by the linear relationship between the BH and the ideality factor. According to Tung's barrier inhomogeneity model, it has been seen that the value of sigma(T) = 7.41 x 10(-5) cm(2/3) V-1/3 from ideality factor versus (kT)(-1) curve is in close agreement with sigma(T) = 7.95 x 10(-5) cm(2/3) V-1/3 value from the Phi(eff) versus (2kT)(-1) curve in the range of 80-200K. The modified Richardson ln(J(0)/T-2)-(q sigma(T))(2)(V-b/eta) (2/3)/[2(kT)(2)] versus(kT)(-1) plot, from Tung's Model, has given a Richardson constant value of 8.47 A cm(-2) K-2 which is in very close agreement with the known value of 8.16 A cm(-2) K-2 for n-type GaAs; considering the effective patch area which is significantly lower than the entiregeometric area of the Schottky contact, in temperature range of 80-200K. Thus, it has been concluded that the use of Tung's lateral inhomogeneity model is more appropriate to interpret the temperature-dependent I-V characteristics in the Schottky contacts. (C) 2013 Elsevier B.V. All rights reserved.
dc.description.sponsorshipTurkish Scientific and Technological Research Council of Turkey (TUBITAK)
dc.description.sponsorshipThis work was supported by the Turkish Scientific and Technological Research Council of Turkey (TUBITAK). The authors also thanks to TUBITAK and Hakkari University.
dc.identifier.doi10.1016/j.physb.2013.01.010
dc.identifier.endpage41
dc.identifier.issn0921-4526
dc.identifier.issn1873-2135
dc.identifier.scopus2-s2.0-84875130331
dc.identifier.scopusqualityQ2
dc.identifier.startpage35
dc.identifier.urihttps://doi.org/10.1016/j.physb.2013.01.010
dc.identifier.urihttps://hdl.handle.net/20.500.14730/10572
dc.identifier.volume414
dc.identifier.wosWOS:000317418000008
dc.identifier.wosqualityQ2
dc.indekslendigikaynakWeb of Science
dc.indekslendigikaynakScopus
dc.language.isoen
dc.publisherElsevier
dc.relation.ispartofPhysica B-Condensed Matter
dc.relation.publicationcategoryMakale - Uluslararası Hakemli Dergi - Kurum Öğretim Elemanı
dc.rightsinfo:eu-repo/semantics/closedAccess
dc.snmzKA_WOS_20250302
dc.subjectGaAs semiconductor
dc.subjectSchottky diodes
dc.subjectSchottky barrier height
dc.subjectBarrier inhomogeneity
dc.subjectRichardson constant
dc.subjectMetal-semiconductor-metal contacts
dc.titleTemperature dependent I-V characteristics of an Au/n-GaAs Schottky diode analyzed using Tung's model
dc.typeArticle

Dosyalar

Orijinal paket

Listeleniyor 1 - 1 / 1
Yükleniyor...
Küçük Resim
İsim:
10572.pdf
Boyut:
549.53 KB
Biçim:
Adobe Portable Document Format